Home / Assortment / MES-100G-10S
MES-100G-10S
MES-100G-10S
Industrial Communication Equipment

MES-100G-10S Unmanaged 2GE SFP + 8GE Industrial Network Switch

2*GE SFP Fiber + 8*GE Unmanaged Industrial Network Switch
8*10/100/1000M RJ45
2*GE SFP Fiber (optical transceivers not included)
Power supply: DC12~52V
Wide operating temperature range: -40~+80 ℃
IP40, aluminium housing
DIN rail mounting

Technical specifications MES-100G-10S

Interface and indicators
Service ports
8*10/100/1000Mbps RJ45 copper ports, Full/half duplex mode, Auto MDI/MDI-X connection
2*1000BaseFX SFP slots
LED indicators
Power: PWR
Link/Act for copper and SFP ports
Standards
Ethernet
IEEE802.3-10BaseT
IEEE802.3i 10Base-T
IEEE802.3u-100BaseTX/100Base-FX
IEEE802.3z-1000BaseX
IEEE802.3ab-1000BaseT
IEEE802.3x-flow control
EMI
FCC Part 15 Subpart B Class A, EN 55022 Class A
EMS
IEC(EN)61000-4-2(ESD) : Contact: ±8kV, Air: ±12kV
IEC(EN)61000-4-3(RS) : 10V/m(80~1000MHz)
IEC(EN)61000-4-4(EFT) : Ethernet Port: ±2kV CM//±1kV DM
IEC(EN)61000-4-5(Surge) : Ethernet Port: ±2kV CM//±1kV DM
IEC(EN)61000-4-6(Conducted RF immunity): 3V(10kHz~150kHz),10V(150kHz~80MHz)
IEC(EN)61000-4-16(Conducted common mode disturbances immunity) : 30V cont. 300V, 1s
IEC(EN )61000-4-8
Blow
IEC 60068-2-27
Falling
IEC 60068-2-32
Vibration
IEC 60068-2-6
Mean time between failures
300,000 hours
Warranty period
3 years
Power supply requirements
Operating voltage
DC12V~52V
Connector
Phoenix type connector
Possibility to connect a backup power supply
have
Overcurrent protection
Current limit 4.0A
Protection against polarity reversal
have
Features
Transmission mode
Storage and forwarding
MAC table size
8K
Packet buffer size
2 Mbit
Backplane bandwidth
20G
Switching delay
<10 µs
Power
< 8 W
Design
Housing material
Aluminium
Degree of enclosure protection
IP40
Dimensions (L*W*H), mm
143.7x103.8x47.7
Weight (net), kg
0.64
Installation options
DIN rail
Operation and storage
Storage temperature, ℃
-40 ~ +85
Relative humidity, % (non-condensing)
5 ~ 95